here are some tips to make our job easy
Bleed is a printing term used to describe the zone outside the trim area.
Elements that touch the edge of the paper/card need to extend into the bleed area beyond the trim edge where the product will be cut.
Trim is where the product will be cut. As it’s very difficult to print exactly to the edge of the artboard, it is necessary to print onto the bleed area and then trim the paper/card down to the required finished size.
The safe area – or the margin – is the zone inside the trim line where no text should be placed. When trimming the sheet of paper/card, any text outside the safe zone could be clipped. A margin of 3mm is usually acceptable.
All artwork should be in CMYK colour model. Colour printing typically uses ink of four colours: Cyan, Magenta, Yellow, and Key (black). For best results, set your software to colour profile: Fogra 39 (ISO 12647-2:2004).
RGB artwork will be converted and colour variations may occur.
You need to supply high resolution artwork at 300 dpi resolution and the file format of choice is PDF. Try to export your PDF as a PDF/x-1a:2001 where possible. We also accept *.eps and high resolution *.jpg.